Dover Marine
17 New Rochester Rd,
Dover NH, 03820
Tel:603.742.5453
Mako 184-CC - main image

2019 Mako 184 CC

Year 2019
Length 18'4 ft

The compact yet deadly MAKO® 184 CC is built tough for fishing and fun, whether you're chasing offshore game or just cruising the islands with the family. Anglers will appreciate the under-gunnel rod storage and the 21-gal. baitwell. And families will love the cushioned forward console seat and the molded-in swim platforms. The hull/deck joint is chemically sealed and bonded 360°, plus it's mechanically fastened every 6" with stainless steel fasteners. The chop-taming, aggressive Deep V hull allows it to brave rougher conditions with confidence, and the wide beam contributes to safety and stability at rest.

Specifications

Year Built 2019
Category Power
Length Overall 18'4 ft
Beam 8'2 ft
Number of Passengers 5
Construction Fiberglass
Deadrise Angle 18 deg
Min Draft 1 ft
Fuel Tank Cap. 54 gal
Dry Weight 2255 lb
Additional Specs
  • Length:18' 4"
  • Beam: 8' 2"
  • Bottom width: 6' 8"
  • Max. recommended HP: 150 HP
  • Fuel capacity: 53.5 gal.
  • Max. person capacity: 5 persons
  • Max. person weight: 965 lbs.
  • Max. person, motor & gear weight: 1727 lbs.
  • Interior depth: 23"
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 12"
  • Dry weight: 2255 lbs.
  • Average hull weight: 1800 lbs.
  • Average package weight: 3055 lbs.
  • Package height: 8' 6"
  • Package height w/T-top or hardtop: 9' 10"
  • Storage length: 25' 7"
Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • CorrosionX stainless spray treatment included
  • Horn

Console

  • Binnacle-mounted motor control
  • Gauge panel w/analog gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Easy access to helm electronics, instruments & switches
  • Forward-console seat w/21-gal. (80 L) baitwell
  • Integrated full-width footrest
  • Acrylic windscreen
  • Marine-grade tinned wiring w/submersible connectors
  • 2 console drink holders

Construction & Exterior

  • 100% composite construction
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports
  • Closed-cell foam-injected stringer grid for USCG-approved flotation
  • Premium marine-grade stainless steel hardware
  • Heavy-duty rub rail & insert
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats, chocks & hinges
  • Reboarding step & stainless steel grab handle
  • MAKO® Bone White gelcoat

Electrical, Mechanical & Plumbing Systems

  • USCG-compliant navigation lights
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Interior

  • Anchor locker
  • Foredeck dodger mounting boss
  • Port & starboard bow seats w/64-qt. (61 L) fishboxes w/gravity overboard drainage
  • Low profile stainless steel bow rails
  • 2 pedestal helm seats w/slide & swivel
  • Self-bailing cockpit
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 4 rods
  • Molded non-skid surfaces throughout
  • Bilge access hatch
  • Port & starboard molded-in swim platforms
  • Four 6" (15.24 cm) polished marine-grade stainless steel cleats

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Factory-matched propeller

T-Top or Hardtop

  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting

Trailer

  • Tandem-axle EZ Loader® aluminum trailer
  • NMMA® certified trailer
  • DOT approved
  • Tandem-axle brakes
  • 13" (33.0 cm) radial tires w/galvanized V5 wheels & galvanized axle
  • Oil bath hubs
  • Leaf spring suspension
  • Heavy-duty winch w/nylon strap & safety strap
  • Stainless steel hardware
  • Galvanized steel components
  • LED lighting
  • PVC loading guides
  • Composite fenders